Volume(CBM):1.83
Data Sheet: SCREEN：LED Digital showing（18.5; BUTTON：mechanical touch; COLOR：black & white，do not support change color on support tube-handle/ handrail and side bar; NVERTOR：china G-way; MOTO：2.4HP MAX:5HP; BELT：2.4MM; ELT Width：600MM; RUNNING AREA：600*1580MM; BOARD：25MM THICKNESS; ROLLER：DIA60MM, LENGTH:600MM; LEFT MOTO：noisy-less AC moto; Speed：1-20KM/H; Angle：0-20%; Lubrication: none; Power：220V+10% 50/60HZ; User weight：max 160KG; SIZE：2270*955*1655; Price：680$; Payment：TT 100% before loading; Delivery：30days
Safety Precautions
Note: Please read the manual before use and pay attention to the following safety precautions.
1. Please ground the wire. If there is no ground wire, it is forbidden to use the treadmill.
2. The treadmill should be used in a dry room. Do not place water or other liquids on the treadmill to avoid moisture.
3. When the machine is working, it should be far away from flammable and explosive materials due to static electricity.
4. The treadmill should be placed stably. The use area is 2500mm×1060mm.
5. The ground power supply should be safely connected to avoid the use of other equipment on the same power cord.
6. It is recommended to use sports shoes, and it is forbidden to use treadmills with bare feet.
7. It is forbidden to use by two or more people at the same time, and the maximum load-bearing weight is 160kgs.
8. Before the running belt does not move, please stand on the pedals on both sides and hold the left and right handrails.
9. The heart rate sensor is not a medical facility. Sometimes it is not very accurate, just to give the user a reference. (Usually, a correct statistic is after 30 seconds)
10. It is not allowed to loosen any adjustment devices of the treadmill.
11. Training equipment can only be used in supervised areas. Do not allow people with heart disease, disability, the elderly, and children under 16 to use this device, or use it under the supervision of a professional.
| ◆Input voltage: AC 220V＋10％ 50Hz
◆Motor rated power: 1750W ◆Maximum power of motor: 5HP ◆Working temperature: 0-40℃ ◆Speed range: 1.0-20.0(km/h) ◆Time range: 0:00－99:59 (minutes:seconds) |
◆Distance range: 0.00－99.9(km)
◆The range of calories: 0－999 (Kcal) ◆Heart rate range: 50-256 (times/minute) ◆Tilt range: (0-20)% ◆Overload protector: 13A ◆Power cord: 16A AC 250V |
Assembly instructions
| 1. Connect the communication line, take M12X65 hexagon head screws, spring washers, flat washers, and install the left and right support columns. | 2. Connect the communication line, take the M10x30 cylindrical head hexagon socket screw, and install the display module. |
 |
 |
| 3. Connect the communication line, take M10x30 cylindrical head hexagon socket screws, spring washers, flat washers, and install the treadmill head. | 4. Take M4x19 and M4*40 screws and install the motor cover. |
 |
 |
Socket and power switch position
The power position of this product is at the bottom of the treadmill. When the power switch is in the “O” position, it is disconnected; when the power switch is in the “-” position, it is in the connected state.
Running belt adjustment method
1. How to adjust the running belt deviation:
If the walking belt deviates to the left, you can adjust the left adjustment screw clockwise or counterclockwise to adjust the right adjustment screw. If the walking belt deviates to the right, you can adjust the right adjustment screw clockwise or counterclockwise to adjust the left adjustment screw. It is recommended to adjust ninety degrees (a quarter of a circle).
2. How to adjust the tightness of the running belt:
If the running belt is loose as a whole, the user slips during running, or the running belt is too tight (which will greatly increase the power output of the inverter and motor), the running belt needs to be adjusted accordingly.
(1) Tightening: Use the supplied special tool (10#L-type wrench) to adjust the adjustment screws in the left and right adjustment holes of the rear cover clockwise in units of a quarter turn (90 degrees) each time. (The adjustment range on the left and right sides is the same)
(2) Loosen adjustment: Use the supplied special tool to adjust the adjustment screws in the left and right adjustment holes of the rear cover counterclockwise in units of a quarter turn (ninety degrees) each time (the adjustment range of the left and right sides is the same).
Instructions for Control Panel (LED)
Buttons and functions:
A: Start: Start the treadmill.
B: Pause: Put the treadmill in a pause state.
C: Stop: stop the running of the treadmill.
D: Exercise program: The treadmill has a built-in training program, and the user has 8 programs to choose from.
E: Custom goals: users set time, distance, and calories by themselves.
F: Speed+: Speed increase button.
G: Speed -: Speed down button.
H: Slope+: Slope increase button.
I: Slope -: Slope decrease button.
J: Speed shortcut key: speed quick selection key (2, 4, 6, 8, 10, 12)
K: gradient shortcut key: gradient quick selection key (2, 4, 6, 8, 10, 12)
L: Movement distance: Movement distance display window.
M: Calories: Display window of calories consumed by exercise.
N: Heart rate: Heart rate display window.
O: Time: Display window of exercise time.
P: Speed: The current speed display window.
Q: Slope: The current slope display window.
Quick instructions
1. Manual mode
1) Turn on the power switch.
2) Press the “START/STOP” button, the system enters a 3-second countdown, the buzzer sounds, and the central dot matrix display area window displays the countdown. After the 3-second countdown is completed, the treadmill starts running at a speed of 1km/h.
3) After starting, you can use the “SPEED+” and “SPEED-” keys to adjust the speed of the treadmill; press the “INCLINE+” and “INCLINE-” keys to adjust the slope of the treadmill.
